Cheap Potting with Tegaderm?

Hardware inside and outside of the ECU
Post Reply
Sudo
Posts: 92
Joined: Mon Mar 17, 2014 12:53 am

Cheap Potting with Tegaderm?

Post by Sudo »

Just browsing cheap way to pot or encapsulate small modules and ran into this link:

http://www.arie.co.za/potting-electronics-with-silicone/

Using Tegaderm will allow silicon to breath to cure. It seems like a great idea.
User avatar
rus084
contributor
contributor
Posts: 678
Joined: Sun Dec 01, 2013 1:40 pm
Location: Russia , Stavropol

Re: Cheap Potting with Tegaderm?

Post by rus084 »

excellent!!!

but later disassemble silicone if necessary repair board?
I have a silicone, but you can only pull out a knife (it can dissolve in gasoline?)

I filled my small display this silicone for protection against water and taped to the dashboard of a moped))). (after all, silicone transparent)
Post Reply