rusefi.com

Posted: **Sun Mar 01, 2015 7:42 pm**

For currents above 1A where high-side control is required in order to use stock harness we have VND5E025AK, a thermally protected P-MOSFET, called a High Side Switch (HSS) by ST.

https://svn.code.sf.net/p/rusefi/code/trunk/hardware/PowerSSO-24_breakout/
https://svn.code.sf.net/p/rusefi/code/trunk/hardware/PowerSSO-24_breakout/PowerSSO-24_breakout_schematic.pdf

Posted: **Sun Mar 01, 2015 7:42 pm**

v 0.1 known issues:

1) pin#1 mark for PowerSSO-24 chip
2) Larger diameter holes for GND, VCC and out wire holes. Larger diameter holes for input wires also, just in case
3) larger diameter heatsink vias to simplify soldering

Posted: **Sun Mar 01, 2015 7:51 pm**

[video][/video]

rusefi.com

high-current high-side module

high-current high-side module

Re: high-current high-side module

Re: high-current high-side module