rusefi.com

Hi.

Are the settings for engine type 47 the ones to use? (crank primary, no secondary and vvt on the cam)

i get 1/2 commanded RPM displayed in console ? vvt angle does change if force random inputs on the cam input but it isnt clear if the simulator is giving out any triggers on the cam channel?

i will try and scope it tomorrow and see

nb only using bare stm32f407

At the moment trigger simulation logic is not aware of VVT

In case of Miata VVT the work-around is a special trigger only for simulation but it requires two rusEfi instances - one running TT_MAZDA_MIATA_VVT_TEST trigger just to produce both signals, the other to consume signals

https://github.com/rusefi/rusefi/issues/566

See also https://github.com/rusefi/rusefi/commit/863701ef905b899fe61a5acf8c26c08dc3dd5447

thanks for quick reply!

im reasonably sure i can just connect my sensors now and see what comes out the other end

i was going to use an mpx4250 for map but it would need stepping down. does there exist a MAP sensor that runs on 3.3v ?

mazdee wrote: ↑

Sat Feb 03, 2018 5:12 pm

i was going to use an mpx4250 for map but it would need stepping down. does there exist a MAP sensor that runs on 3.3v ?

Want to start a thread about your car with pics and stuff? MAP sensor voltage is offtopic for "Miata VVT trigger sim" thread. Sorry for my kind of crazy

no problem