[README] End users, PLEASE subscribe to this topic - MAJOR firmware announcements

It's all about the code!
Post Reply
User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Sat Feb 09, 2019 9:37 pm

This thread is used to announce MAJOR firmware changes which could affect all users. Please subscribe if you use rusEfi.

A typical example of an announcement would be incompatible configuration change - in such cases you one cannot simply flash latest firmware but some kind of special considerations would be needed.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Sat Feb 23, 2019 3:12 am

Just made an incompatible configuration change - please load&save&migrate your settings via TS while updating to latest version. This was about https://github.com/rusefi/rusefi/issues/688
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Sat Apr 20, 2019 3:02 pm

trigger input code could be FUBAR at the moment, will update this post once https://github.com/rusefi/rusefi/issues/767 is fixed
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Fri Apr 26, 2019 1:38 am

https://github.com/rusefi/rusefi/issues/776 is hopefully an improvement which makes I and D term scale of all PID settings to use the right time scale, so all I and D pid settings would need to be adjusted accordingly.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Fri Jun 14, 2019 5:04 pm

We have changed the way some corrections are treated under https://github.com/rusefi/rusefi/issues/773 - so while migrating to latest the scale of configuration has changed.

Bumping configuration version to 1.06 to highlight the fact of incompatible change.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Mon Jul 01, 2019 4:40 pm

https://github.com/rusefi/rusefi/issues/805 "calibrate TPS" feature is now (hopefully) working again with Tuner Studio. Please use latest project .ini file.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Fri Jul 12, 2019 6:26 pm

Incompatible configuration change - https://github.com/rusefi/rusefi/commit ... 39f5af4b1a

You would need to migrate configuration prior to 20190712 version migration: save settings in TunerStudio project & update mainController.ini file.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Mon Sep 02, 2019 4:22 am

Idle air valve PID now has iTermMin/iTermMax settings, if you migrate to latest firmware you might need to manually set this value. min=-200 max=200 is a good starting point to have same behavior as previously. See https://github.com/rusefi/rusefi/issues/913
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Thu Sep 12, 2019 2:59 pm

FSIO https://github.com/rusefi/rusefi/issues/922 incompatible change:

fan_on_setting is now cfg_fanOnTemperature
fan_off_setting is now cfg_fanOffTemperature

Please adjust your FSIO settings if you use these variables!
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Wed Nov 06, 2019 5:37 am

https://github.com/rusefi/rusefi/issues/796 is now fixed. This interesting defect mostly affects users with few tooth trigger wheels like Miata and similar Mitsubishi, mostly low RPM like cranking is affected - sometimes spark would not happen altogether. That's an important one unless you have a 36/1 or 60/2 trigger!
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Mon Nov 25, 2019 5:04 am

With https://github.com/rusefi/rusefi/pull/1029 stepper pin modes are now used - so if you had non-default mode configured behavior would now change!
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 9846
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: End users, PLEASE subscribe to this topic - MAJOR firmware announcements

Post by AndreyB » Sun Dec 22, 2019 7:04 pm

We've made incompatible changes to TS gauges - data logging speed could go up with smaller data packet, but you would need to create new project if you update to latest firmware.

Configuration part of the project was not changed, only the gauges.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Post Reply