rusefi.com

Could this be a way to self-document what's going on in the firmware?

Three years later I am still interested in the whole "show what's going on inside the ECU, while it happens" approach. Fresh proof of concept:

34Cº for both 1.2V and 1.8V? Is it because of the table readout or because the curve is that flat in that region?

It definitely adds up to the useability. I'd make it a bit even more extended (verbose) and (if possible and is not done yet) with a direct link to that '2700' setting.

puff wrote: ↑

Wed Jun 12, 2019 11:57 am

34Cº for both 1.2V and 1.8V? Is it because of the table readout or because the curve is that flat in that region?

fake data, this is just a demo control

I am ready to start merging alpha version of live documentation into master

https://github.com/rusefi/rusefi/pull/847 is the firmware part of the change

I will keep talking to myself here. This now handles conditional logic - green panel is active logic, red panel is deactivated. Now I need to migrate something bigger to use this framework, maybe it would start making some sense? Maybe not.