Formulas view - live documentation

It's all about the code!
Post Reply
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Formulas view - live documentation

Post by AndreyB »

Could this be a way to self-document what's going on in the firmware?



Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Formulas view - live documentation

Post by AndreyB »

Three years later I am still interested in the whole "show what's going on inside the ECU, while it happens" approach. Fresh proof of concept:

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
puff
contributor
contributor
Posts: 2961
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: Formulas view - live documentation

Post by puff »

34Cº for both 1.2V and 1.8V? Is it because of the table readout or because the curve is that flat in that region?

It definitely adds up to the useability. I'd make it a bit even more extended (verbose) and (if possible and is not done yet) with a direct link to that '2700' setting.
Last edited by puff on Wed Jun 12, 2019 12:00 pm, edited 1 time in total.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Formulas view - live documentation

Post by AndreyB »

puff wrote:
Wed Jun 12, 2019 11:57 am
34Cº for both 1.2V and 1.8V? Is it because of the table readout or because the curve is that flat in that region?
fake data, this is just a demo control
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Formulas view - live documentation

Post by AndreyB »



I am ready to start merging alpha version of live documentation into master

https://github.com/rusefi/rusefi/pull/847 is the firmware part of the change
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Formulas view - live documentation

Post by AndreyB »

I will keep talking to myself here. This now handles conditional logic - green panel is active logic, red panel is deactivated. Now I need to migrate something bigger to use this framework, maybe it would start making some sense? Maybe not.

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Post Reply