Firmware bugs

It's all about the code!
Post Reply
JRD McLAREN
contributor
contributor
Posts: 118
Joined: Mon Mar 04, 2019 10:19 pm
Soldering skill: yes
Coding skill?: yes
Contact:

Firmware bugs

Post by JRD McLAREN » Fri Jun 14, 2019 4:35 pm

I can't found any related thread about bugs in firmware.
So started one ...

Now I can try ver. 20190614 ..
..
and fill cylinders with fuel .. on cranking stage ..

inj.time 277.46ms .. and other high numbers ..
Attachments
rus44.msl
(34.04 KiB) Downloaded 76 times

User avatar
russian
Site Admin
Posts: 9527
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: Firmware bugs

Post by russian » Fri Jun 14, 2019 4:57 pm

We've recently made changes related to https://github.com/rusefi/rusefi/issues/773

this is about unifying scale of corrections and adjustments. Right now we are debating what kind of announcement should be done at https://rusefi.slack.com/messages/CJZ7LJFL1/stars/

Unfortunately we do not have a uniform opinion on how to approach such incompatible changes and the developer who did the change did not investigate user migration experience. I could be wrong and this could be totally unrelated.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

mck1117
running engine in first post
running engine in first post
Posts: 227
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish
Soldering skill: yes
Coding skill?: yes

Re: Firmware bugs

Post by mck1117 » Fri Jun 14, 2019 6:28 pm

Can you share your .msq tune file? It's hard to diagnose without knowing what the configuration in use was.

Also, did you upgrade from a previous firmware version, or is this a fresh, blank configuration?

JRD McLAREN
contributor
contributor
Posts: 118
Joined: Mon Mar 04, 2019 10:19 pm
Soldering skill: yes
Coding skill?: yes
Contact:

Re: Firmware bugs

Post by JRD McLAREN » Fri Jun 14, 2019 7:00 pm

I was upgrade from (working) previous version ...
(now is downgraded back)

As I'm understand it, it is not BUG, but it is change from #coef# to #percentage# ...
(or vice versa)

and TPS calibration is not working also ...
Attachments
2019-06-14_17.18.37.msq
(135.28 KiB) Downloaded 14 times

User avatar
russian
Site Admin
Posts: 9527
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: Firmware bugs

Post by russian » Tue Jun 18, 2019 2:03 am

JRD McLAREN wrote:
Fri Jun 14, 2019 7:00 pm
TPS calibration is not working
This is probably fixed now https://github.com/rusefi/rusefi/issues/805
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Post Reply