Page 1 of 1

VVT support for mote than one trigger tooth?

Posted: Wed Jul 10, 2019 10:16 pm
by 960
I have a cam trigger wheel with 4 teeth. 2 short and two long.

Do you have any support for it?

I have all the data/angles etc. I think.

Re: VVT support for mote than one trigger tooth?

Posted: Wed Jul 10, 2019 11:18 pm
by AndreyB
How many VVT cams do you have? Can you post some images or diagram of this wheel?

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 1:30 am
by 960
I have VVT at the intake only.

I'll see if I find a image.

It should generate something like this:
AcroRd32_E6GE0ovEvd.png
AcroRd32_E6GE0ovEvd.png (360.25 KiB) Viewed 7697 times

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 10:34 am
by AndreyB
Please clarify if this that's hall or VR

The chart seems to show three signals? The one on top must be crank. What are the other two signals? Which one do we care about here?

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 11:20 am
by 960
It's hall.

It shows the same signal, I think the bottom one are another cam position?

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 11:41 am
by 960
This should be the right values I think
chrome_wN8HLcZjOF.png
chrome_wN8HLcZjOF.png (410.65 KiB) Viewed 7684 times
http://files.s4wiki.com/docs/Audi_R4-5V_T_132kW_ME7.pdf

Page 798.

Searched: Nockenwellen

Re: VVT support for mote than one trigger tooth?

Posted: Fri Jul 12, 2019 11:08 am
by AndreyB

Re: VVT support for mote than one trigger tooth?

Posted: Tue Sep 03, 2019 7:40 pm
by 960
This explained a little better to me.

The flank edges are 720/4 :-)
AcroRd32_Wu5fTTiMYg.png
AcroRd32_Wu5fTTiMYg.png (458.67 KiB) Viewed 7529 times

Re: VVT support for mote than one trigger tooth?

Posted: Fri Sep 06, 2019 11:01 am
by 960
Just think I found the reason for two long teeth.

It seems like it is for the ecu to know where "Max deviation" are.
chrome_Lw5IRgDglB.png
chrome_Lw5IRgDglB.png (407.79 KiB) Viewed 7493 times
chrome_kF6dsOPemI.png
chrome_kF6dsOPemI.png (367.74 KiB) Viewed 7493 times

Re: VVT support for mote than one trigger tooth?

Posted: Thu Aug 27, 2020 5:01 am
by AndreyB
I believe that this is finally done https://github.com/rusefi/rusefi/issues/883