Page 1 of 1

VVT support for mote than one trigger tooth?

Posted: Wed Jul 10, 2019 10:16 pm
by 960
I have a cam trigger wheel with 4 teeth. 2 short and two long.

Do you have any support for it?

I have all the data/angles etc. I think.

Re: VVT support for mote than one trigger tooth?

Posted: Wed Jul 10, 2019 11:18 pm
by russian
How many VVT cams do you have? Can you post some images or diagram of this wheel?

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 1:30 am
by 960
I have VVT at the intake only.

I'll see if I find a image.

It should generate something like this:
AcroRd32_E6GE0ovEvd.png
AcroRd32_E6GE0ovEvd.png (360.25 KiB) Viewed 141 times

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 10:34 am
by russian
Please clarify if this that's hall or VR

The chart seems to show three signals? The one on top must be crank. What are the other two signals? Which one do we care about here?

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 11:20 am
by 960
It's hall.

It shows the same signal, I think the bottom one are another cam position?

Re: VVT support for mote than one trigger tooth?

Posted: Thu Jul 11, 2019 11:41 am
by 960
This should be the right values I think
chrome_wN8HLcZjOF.png
chrome_wN8HLcZjOF.png (410.65 KiB) Viewed 128 times
http://files.s4wiki.com/docs/Audi_R4-5V_T_132kW_ME7.pdf

Page 798.

Searched: Nockenwellen

Re: VVT support for mote than one trigger tooth?

Posted: Fri Jul 12, 2019 11:08 am
by russian