microRusEfi connection to Tuner Studio

[JPh]

W7
Yes I installed the drivers with the console

[AndreyB]

please try installing https://github.com/rusefi/rusefi_external_utils/raw/master/DFU_mode/DfuSe_Demo_V3.0.6_Setup.exe
manually maybe this would get drivers installed properly?

[JPh]

window1.JPG (38.63 KiB) Viewed 9931 times

[JPh]

window2.JPG (66.08 KiB) Viewed 9930 times

[JPh]

I found a way to install the missing driver. I installed it manually from the device manager.
You have to give the path : C:\Program Files (x86)\STMicroelectronics\Software\DfuSe v3.0.6\Bin\Driver\Win7

[Abricos]

Maybe You have so many old USB connections ...
Delete what you not used in Devices manager/universal serial bus controller.

[AndreyB]

I found a way to install the missing driver. I installed it manually from the device manager.

And? Did you get to update firmware? is connection reliable now?

is your problem solved?

[JPh]

The firmware update was successful.

Now the connection with TS is stable.

I just asked a question on SLACK about the blinking red/green Indicator in the Bottom right corner of the TS screen.

It seems that the problem is the automatic install of the STM32 bootloader does not work.

[AndreyB]

I just asked a question on SLACK about the blinking red/green Indicator in the Bottom right corner of the TS screen.

I must have missed it Can you please repeat here?

[JPh]

My red/green indicator in the bottom right is not steady green. It blinks red/green. So I asked if it is normal. Since then I made some test changes with TS and it burns correctly in mre so I think it is normal.

[JPh]

In your new video about programming you introduce the need to push the program button.
I didn't knew it when I program mine so I haven't done it but it worked!

[AndreyB]

In your new video about programming you introduce the need to push the program button.
I didn't knew it when I program mine so I haven't done it but it worked!

In my video I was doing initial first time programming which is also emergency-things-are-broken programming, first time even from the factory button usage is required, that's "Manual DFU"

Your programming is the good-case-normal-user programming "Auto DFU" it does not require the button.

[JPh]

Thanks useful information !