Frankenso pnp with jumpers for 94-95 Miata

It's all about the code!
Post Reply
Cartoonian
Posts: 5
Joined: Fri Aug 21, 2020 1:38 am

Frankenso pnp with jumpers for 94-95 Miata

Post by Cartoonian »

The firmware installed on the stm32 is from the na6 files. Then the jumpers make it compatible with the na8. Is this correct?

I’ve sat on this board for a while and I’m trying to dive back in. Hope this is the right place for this question.

Thank you
stefanst
contributor
contributor
Posts: 703
Joined: Wed Feb 17, 2016 12:24 am
Location: USA 08530

Re: Frankenso pnp with jumpers for 94-95 Miata

Post by stefanst »

You are correct. The firmware is the same, the jumpers are different. The tune will be different too to deal with the different engine size and some different I/O.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Frankenso pnp with jumpers for 94-95 Miata

Post by AndreyB »

https://github.com/rusefi/rusefi/wiki/Miata-NA-48-pin-board-for-MRE is about a different board but might be helpful - second and third pictures show same board set for 91 vs 94. Kind of show areas of change.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Post Reply