Hello, guys!
Please, tell me, what it means?
What's wrong?
Here is the tune:
https://rusefi.com/online/view.php?msq=496
I have this error with versions of the software released after mach, 10, 2021
What does startup pin state error mean
What does startup pin state error mean
- Attachments
-
- image.png (128.12 KiB) Viewed 4795 times
Last edited by Kavabanga on Sat May 01, 2021 11:48 pm, edited 1 time in total.
- AndreyB
- Site Admin
- Posts: 14333
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: What does XXX error mean
firmware validates expected state of hardware in terms of electric pull down or pull up
looks like on your board there is no pull in the expected direction so firmware refuses to operate in an unsafe setup
looks like on your board there is no pull in the expected direction so firmware refuses to operate in an unsafe setup
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14333
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: What does XXX error mean
i should make error message a bit more clear
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: What does XXX error mean
Ok, thank you!
But why don't I have this message with previous versions of the software?
For example, posted in December, 18, 2021?
And how to fix this error?
But why don't I have this message with previous versions of the software?
For example, posted in December, 18, 2021?
And how to fix this error?
-
- contributor
- Posts: 94
- Joined: Sat Jul 19, 2014 10:43 pm
- Location: 67867
- Github Username: chuckwagoncomputing
- Slack: dbh97
Re: What does startup pin state error mean
I'm not sure why it shows this error if ETB is disabled, and I don't think it is supposed to, but I think you can fix it by going to "Full Pinout 1/3" in the "Controller" menu and set the ETB pins to "NONE".