What does startup pin state error mean

From Frankenstein to Proteus and everything in between
Post Reply
Kavabanga
Posts: 66
Joined: Sat Apr 13, 2019 9:07 pm

What does startup pin state error mean

Post by Kavabanga »

Hello, guys!
Please, tell me, what it means?
What's wrong?
Here is the tune:
https://rusefi.com/online/view.php?msq=496
I have this error with versions of the software released after mach, 10, 2021
Attachments
image.png
image.png (128.12 KiB) Viewed 4564 times
Last edited by Kavabanga on Sat May 01, 2021 11:48 pm, edited 1 time in total.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: What does XXX error mean

Post by AndreyB »

firmware validates expected state of hardware in terms of electric pull down or pull up

looks like on your board there is no pull in the expected direction so firmware refuses to operate in an unsafe setup
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: What does XXX error mean

Post by AndreyB »

i should make error message a bit more clear
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Kavabanga
Posts: 66
Joined: Sat Apr 13, 2019 9:07 pm

Re: What does XXX error mean

Post by Kavabanga »

Ok, thank you!
But why don't I have this message with previous versions of the software?
For example, posted in December, 18, 2021?

And how to fix this error?
dbh97
contributor
contributor
Posts: 84
Joined: Sat Jul 19, 2014 10:43 pm
Location: 67867
Github Username: chuckwagoncomputing
Slack: dbh97

Re: What does startup pin state error mean

Post by dbh97 »

I'm not sure why it shows this error if ETB is disabled, and I don't think it is supposed to, but I think you can fix it by going to "Full Pinout 1/3" in the "Controller" menu and set the ETB pins to "NONE".
Post Reply