Running state 100mA
Stop state 40mA
StandBy state 30mA
With CAN transceivers removed & Power LED disabled
UNKWN
With CAN transceiver replaced & Power LED disabled
UNKWN
With TLS208D1, CAN transceiver replaced & Power LED disabled
UNKWN
____________________________________
TODO
Fix Standby mode wakeup.
Make list of shared interrupt pins with most amount of MCUs. -SubTODO- use unused interrupt as to make integration easier.
Find & test alternative can transceivers. Have plenty of TJAs & 82c. Awaiting arrival of TJR1443, which are probably perfection, with dedicated wkup/error pin. -SubTODO- Implement TJR properly, to allow error reading.
Implement external wakeup as well.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."