STM Sleep/Stop/Standby

It's all about the code!
Post Reply
nmstec
contributor
contributor
Posts: 124
Joined: Tue Oct 05, 2021 9:02 pm
Location: Vancouver

STM Sleep/Stop/Standby

Post by nmstec »

Proteus R0.6

STM32F767. PA0 Wake-up

No hardware modifications

Running state 100mA
Stop state 40mA
StandBy state 30mA


With CAN transceivers removed & Power LED disabled

UNKWN

With CAN transceiver replaced & Power LED disabled

UNKWN

With TLS208D1, CAN transceiver replaced & Power LED disabled

UNKWN





____________________________________

TODO
  • Fix Standby mode wakeup.

    Make list of shared interrupt pins with most amount of MCUs. -SubTODO- use unused interrupt as to make integration easier.

    Find & test alternative can transceivers. Have plenty of TJAs & 82c. Awaiting arrival of TJR1443, which are probably perfection, with dedicated wkup/error pin. -SubTODO- Implement TJR properly, to allow error reading.

    Implement external wakeup as well.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."

-Dave B, Hero, Tuner, and probably has a car.
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: STM Sleep/Stop/Standby

Post by mck1117 »

Here's an accounting of where the power is going on Proteus with the STM32 in standby mode.
image.png
image.png (91.94 KiB) Viewed 2149 times
nmstec
contributor
contributor
Posts: 124
Joined: Tue Oct 05, 2021 9:02 pm
Location: Vancouver

Re: STM Sleep/Stop/Standby

Post by nmstec »

SD Card in AWAKE & STOP eats 7-8mA more.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."

-Dave B, Hero, Tuner, and probably has a car.
Post Reply