STM Sleep/Stop/Standby
Posted: Fri Jan 07, 2022 5:03 am
Proteus R0.6
STM32F767. PA0 Wake-up
No hardware modifications
Running state 100mA
Stop state 40mA
StandBy state 30mA
With CAN transceivers removed & Power LED disabled
UNKWN
With CAN transceiver replaced & Power LED disabled
UNKWN
With TLS208D1, CAN transceiver replaced & Power LED disabled
UNKWN
____________________________________
TODO
STM32F767. PA0 Wake-up
No hardware modifications
Running state 100mA
Stop state 40mA
StandBy state 30mA
With CAN transceivers removed & Power LED disabled
UNKWN
With CAN transceiver replaced & Power LED disabled
UNKWN
With TLS208D1, CAN transceiver replaced & Power LED disabled
UNKWN
____________________________________
TODO
- Fix Standby mode wakeup.
Make list of shared interrupt pins with most amount of MCUs. -SubTODO- use unused interrupt as to make integration easier.
Find & test alternative can transceivers. Have plenty of TJAs & 82c. Awaiting arrival of TJR1443, which are probably perfection, with dedicated wkup/error pin. -SubTODO- Implement TJR properly, to allow error reading.
Implement external wakeup as well.