Proteus custom analog inputs

It's all about the code!
Post Reply
User avatar
kneelo
Posts: 39
Joined: Sun Jun 10, 2018 6:36 am
Location: Western Australia

Proteus custom analog inputs

Post by kneelo »

I have a car with a split fuel tank and 2 separate level sensors. I want to create a custom channel that calculates the total based on the two signals but am struggling to find where to define a custom analog signal... What am I missing?
Simon@FutureProof
contributor
contributor
Posts: 413
Joined: Tue Jul 24, 2018 8:55 pm
Github Username: Orchardperformance
Slack: Orchardperformance

Re: Proteus custom analog inputs

Post by Simon@FutureProof »

This might be an LUA job.

Bumping this over to the software forum for visibility.
Now keeping MRE in stock in the UK - https://www.FutureProofPerformance.com
nmstec
contributor
contributor
Posts: 124
Joined: Tue Oct 05, 2021 9:02 pm
Location: Vancouver

Re: Proteus custom analog inputs

Post by nmstec »

kneelo wrote:
Sun Apr 17, 2022 12:36 pm
I have a car with a split fuel tank and 2 separate level sensors. I want to create a custom channel that calculates the total based on the two signals but am struggling to find where to define a custom analog signal... What am I missing?
Usual way is to tie them inline. But otherwise, Simon is right, LUA job.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."

-Dave B, Hero, Tuner, and probably has a car.
User avatar
kneelo
Posts: 39
Joined: Sun Jun 10, 2018 6:36 am
Location: Western Australia

Re: Proteus custom analog inputs

Post by kneelo »

thanks gents will wire in series and see what happens
puff
contributor
contributor
Posts: 2961
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: Proteus custom analog inputs

Post by puff »

in mazda rx7 there are two fuel level sensors: the main one and the auxiliary one (the fuel tank is somewhat split, afaik), and they are not in series, but are rather connected to separate inputs in the dashboard.
Post Reply