Page 1 of 1
Proteus custom analog inputs
Posted: Sun Apr 17, 2022 12:36 pm
by kneelo
I have a car with a split fuel tank and 2 separate level sensors. I want to create a custom channel that calculates the total based on the two signals but am struggling to find where to define a custom analog signal... What am I missing?
Re: Proteus custom analog inputs
Posted: Mon Apr 18, 2022 5:21 pm
by Simon@FutureProof
This might be an LUA job.
Bumping this over to the software forum for visibility.
Re: Proteus custom analog inputs
Posted: Mon Apr 18, 2022 6:55 pm
by nmstec
kneelo wrote: ↑Sun Apr 17, 2022 12:36 pm
I have a car with a split fuel tank and 2 separate level sensors. I want to create a custom channel that calculates the total based on the two signals but am struggling to find where to define a custom analog signal... What am I missing?
Usual way is to tie them inline. But otherwise, Simon is right, LUA job.
Re: Proteus custom analog inputs
Posted: Tue Apr 19, 2022 11:29 am
by kneelo
thanks gents will wire in series and see what happens
Re: Proteus custom analog inputs
Posted: Wed Apr 20, 2022 6:01 pm
by puff
in mazda rx7 there are two fuel level sensors: the main one and the auxiliary one (the fuel tank is somewhat split, afaik), and they are not in series, but are rather connected to separate inputs in the dashboard.