Proteus custom analog inputs
Proteus custom analog inputs
I have a car with a split fuel tank and 2 separate level sensors. I want to create a custom channel that calculates the total based on the two signals but am struggling to find where to define a custom analog signal... What am I missing?
-
- contributor
- Posts: 413
- Joined: Tue Jul 24, 2018 8:55 pm
- Github Username: Orchardperformance
- Slack: Orchardperformance
Re: Proteus custom analog inputs
This might be an LUA job.
Bumping this over to the software forum for visibility.
Bumping this over to the software forum for visibility.
Now keeping MRE in stock in the UK - https://www.FutureProofPerformance.com
Re: Proteus custom analog inputs
Usual way is to tie them inline. But otherwise, Simon is right, LUA job.
"Dave B. 5:03 PM
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."
-Dave B, Hero, Tuner, and probably has a car.
Mark is an ass but by far the most potent combination of knowledgeable ass, smart ass, get it done ass and determined ass. and his ass consistently puts in time."
-Dave B, Hero, Tuner, and probably has a car.
Re: Proteus custom analog inputs
thanks gents will wire in series and see what happens
Re: Proteus custom analog inputs
in mazda rx7 there are two fuel level sensors: the main one and the auxiliary one (the fuel tank is somewhat split, afaik), and they are not in series, but are rather connected to separate inputs in the dashboard.