https://www.rusefi.com/online/view.php?log=1138
firs log after calibration
second without calibration
https://www.rusefi.com/online/view.php?log=1139
https://www.rusefi.com/online/view.php?msq=1360
Throttle body BOSCH 0 280 750 474 have problem TPS
Throttle body BOSCH 0 280 750 474 have problem TPS
- Attachments
-
- Screenshot 2023-01-09 223036.jpg (122.63 KiB) Viewed 2681 times
-
- s-l500.jpg (23.5 KiB) Viewed 2681 times
Last edited by Hmelik on Mon Jan 09, 2023 9:13 pm, edited 1 time in total.
-
AndreyB
- Site Admin
- Posts: 14323
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Throttle body BOSCH 0 280 750 474 have problem TPS
Try changing calibration number just a bit manually. Looks like usually error is below threshold but sometimes it gets out of expected range 
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
mck1117
- running engine in first post
- Posts: 1494
- Joined: Mon Jan 30, 2017 2:05 am
- Location: Seattle-ish
Re: Throttle body BOSCH 0 280 750 474 have problem TPS
one useful tool is to look at the raw primary vs. secondary in megalogviewer - it looks like you're overtraveling the sensor slightly
try:
set your primary min/max to 0.664/4.340
set your secondary min/max to 4.365/0.671
- image.png (84.71 KiB) Viewed 2665 times
set your primary min/max to 0.664/4.340
set your secondary min/max to 4.365/0.671