rusefi.com

Posted: **Sun Dec 22, 2024 1:56 pm**

Hello, I am experiencing a problem with the VVT output 1 on the microRusEFI board. After a few accelerations, the VVT output 1 remains activated, the pin used is pin 7 (Low Side 1). I have also tested with double VVT output using pin 3 (Low Side 2) and the VVT output 2 works correctly, there are no problems.

Posted: **Sun Dec 22, 2024 2:11 pm**

Hello, I am experiencing a problem with the VVT output 1 on the microRusEFI board. After a few accelerations, the VVT output 1 remains activated, the pin used is pin 7 (Low Side 1). I have also tested with double VVT output using pin 3 (Low Side 2) and the VVT output 2 works correctly, there are no problems.

Posted: **Sun Dec 22, 2024 3:43 pm**

https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF is asking for logs

Not much life on the forum either way

Posted: **Wed Dec 25, 2024 7:15 pm**

Hi, I'm sending records

Posted: **Wed Dec 25, 2024 7:16 pm**

AndreyB wrote: ↑
Sun Dec 22, 2024 3:43 pm
https://github.com/rusefi/rusefi/wiki/rusEFI-Quick-Start-PDF is asking for logs

Not much life on the forum either way

rusefi.com

VVT OUTPUT 1 Problem (MicroRusEFI)

VVT OUTPUT 1 Problem (MicroRusEFI)

VVT OUTPUT 1 Problem (MicroRusEFI)

Re: VVT OUTPUT 1 Problem (MicroRusEFI)

Re: VVT OUTPUT 1 Problem (MicroRusEFI)

Re: VVT OUTPUT 1 Problem (MicroRusEFI)