[info] MX7-C-35PL-C11 35 pin connector
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
MX7-C-35PL-C11 35 pin connector
JAE 35 pin connector as used on my 2003 transmission controller module
https://svn.code.sf.net/p/rusefi/code/trunk/hardware/MX7-C-35PL-C11-connector/
https://svn.code.sf.net/p/rusefi/code/trunk/hardware/MX7-C-35PL-C11-connector/MX7-C-35PL-C11-gerber/MX7-C-35PL-C11_R0.1.zip
https://svn.code.sf.net/p/rusefi/code/trunk/hardware/MX7-C-35PL-C11-connector/
https://svn.code.sf.net/p/rusefi/code/trunk/hardware/MX7-C-35PL-C11-connector/MX7-C-35PL-C11-gerber/MX7-C-35PL-C11_R0.1.zip
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
Board ordered as 2oz (takes more time)
Seems like Oshpart has improved their processing software to merge two drill files - previously they were only using one file and it did not go well for us.
Seems like Oshpart has improved their processing software to merge two drill files - previously they were only using one file and it did not go well for us.
- Attachments
-
- 491b23df27cd1c04564ee206a167b3b4.png (138.77 KiB) Viewed 9026 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
board looks good
- Attachments
-
- 20161221_213641.jpg (755.31 KiB) Viewed 8958 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: MX7-C-35PL-C11 35 pin connector
That's good news. Looks good.
Welcome to the friendlier side of internet crazy
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
Finally getting back to making the harness but this board has the same silkscreen offset issue as http://rusefi.com/forum/viewtopic.php?f=4&t=687
While we are on that can we also make traces wider as well? Could be same issue with copper rings too large.
While we are on that can we also make traces wider as well? Could be same issue with copper rings too large.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: MX7-C-35PL-C11 35 pin connector
Which revision is your board marked? We have a couple out there now are we sure you have the correct revision? Just trying to make sure we are all on the same page, as I don't have eyes on it.
Welcome to the friendlier side of internet crazy
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
That's a young board, only 0.1 was ever ordered - that's the revision i have.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: MX7-C-35PL-C11 35 pin connector
Oh, that's a different board. I changed the mask to 0.003, and fattened up the traces where I could. Draft committed.
Welcome to the friendlier side of internet crazy
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
I need your gerbers and your suby (once I get I larger garage)
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: MX7-C-35PL-C11 35 pin connector
Gerbers generated and committed.
Welcome to the friendlier side of internet crazy
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
I know what i have forgotten to ask forkb1gtt wrote:Gerbers generated and committed.
Can you please add pinout silkcreen on the back side as well? That's only needed for wiring half of the connector - the connector pads are covered by plastic.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: MX7-C-35PL-C11 35 pin connector
Silk screen added, and re-committed.
Welcome to the friendlier side of internet crazy
- AndreyB
- Site Admin
- Posts: 14328
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: MX7-C-35PL-C11 35 pin connector
Thank you! Just ordered new boards.kb1gtt wrote:Silk screen added, and re-committed.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute