The 60-2 is a fairly standard Bosch trigger pattern used on most of the Motronic based systems, that means BMW from ~83 to present, VW, some AUDI and I believe some volvo and Alfa with Bosch management.
BMW sensors are VR like the VW engines up until about 1998 when they switched to Hall, so there is plenty of them out there with Hall.
Basic / Trigger setting problem - little bit confused
-
- contributor
- Posts: 413
- Joined: Tue Jul 24, 2018 8:55 pm
- Github Username: Orchardperformance
- Slack: Orchardperformance
Re: Basic / Trigger setting problem - little bit confused
Now keeping MRE in stock in the UK - https://www.FutureProofPerformance.com
-
- contributor
- Posts: 435
- Joined: Mon Mar 04, 2019 10:19 pm
- Location: Slovakia
Re: Basic / Trigger setting problem - little bit confused
..another one scope ..
- Attachments
-
- inj_timing1.4.8.2_wasted_spark04.05.jpg (416.63 KiB) Viewed 7948 times
.. some Proteus and microRusEFI for sale in Europe ..
- AndreyB
- Site Admin
- Posts: 14331
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Basic / Trigger setting problem - little bit confused
Did you end up with a running engine?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
- contributor
- Posts: 435
- Joined: Mon Mar 04, 2019 10:19 pm
- Location: Slovakia
Re: Basic / Trigger setting problem - little bit confused
Yes, it run ..
I have some logged data ..
..and new frankenso board on my desk ..
It looks like a pretty fast ecu, with huge potential..
I have some logged data ..
..and new frankenso board on my desk ..
It looks like a pretty fast ecu, with huge potential..
.. some Proteus and microRusEFI for sale in Europe ..
- AndreyB
- Site Admin
- Posts: 14331
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Basic / Trigger setting problem - little bit confused
Video or it never happened
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
- contributor
- Posts: 435
- Joined: Mon Mar 04, 2019 10:19 pm
- Location: Slovakia
Re: Basic / Trigger setting problem - little bit confused
.. some Proteus and microRusEFI for sale in Europe ..
- AndreyB
- Site Admin
- Posts: 14331
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Basic / Trigger setting problem - little bit confused
60/2 VW part of the mess is now https://github.com/rusefi/rusefi/issues/988
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14331
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Basic / Trigger setting problem - little bit confused
@mck1117 said
a hall sensor engine will work fine with the VR config (ie, only decode one edge)
event every 6 degrees vs. event every 3 degrees isn't a difference, other than sucking up cpu cycles
new messages
whatever edge and type of sensor you have, if you see gap ratios of 1-1-1-2-2-1-1-1 instead of 1-1-1-3-1-1-1 then the polarity is wrong
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute