Tunerstudio Refactoring
Tunerstudio Refactoring
I am working at a TS refactoring, and have a .ini file here if anyone will try it out.
It's far from finished, as some firmware additions/changes are required
Any feedback welcome.
1.07
All menus are cleaned up and grouped more rational
It's far from finished, as some firmware additions/changes are required
Any feedback welcome.
1.07
All menus are cleaned up and grouped more rational
Last edited by 960 on Fri Jul 19, 2019 10:14 pm, edited 3 times in total.
- AndreyB
- Site Admin
- Posts: 14352
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Tunerstudio Refactoring
My current focus is https://github.com/rusefi/rusefi/issues/866 which I believe would contribute towards end goal of user-friendly general purpose PID.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: Tunerstudio Refactoring
Good!
Gp-pwm maps are among the most needed additions for this to be complete.
I have a new .ini file with more added and fully working.
Also waiting for TS to add the 1d array support to replace the curves.
Gp-pwm maps are among the most needed additions for this to be complete.
I have a new .ini file with more added and fully working.
Also waiting for TS to add the 1d array support to replace the curves.
Re: Tunerstudio Refactoring
I have also made some different dashboard layouts I will post here.
I am currently trying to add presets for all the most common sensors + injectors.
Here are a typical dash for tuning
I am currently trying to add presets for all the most common sensors + injectors.
Here are a typical dash for tuning
Re: Tunerstudio Refactoring
and how to use it ???
need instruction how to used
where to add this file (rusefi_refactored.ini) ???
when to add this is a file ???
need instruction how to used
where to add this file (rusefi_refactored.ini) ???
when to add this is a file ???
Re: Tunerstudio Refactoring
Just go to File, Vehicle Projects, Project properties and select the .ini file.
Or you can create new project, and load this ini instead of the .ini you normally use.
For the dashboard, just right click mouse button and select load dashboard at top of the menu.
Re: Tunerstudio Refactoring
A new .ini with a little more fixes and more added.
(Accel Enrichments + Spark Edge)
EDIT: I have been uploading the file with Pin-mapping.
This would be the right ones:
Can someone change the ignition pin mode to Falling and Rising in firmware?
(Instead of default, default inverted...)
(Accel Enrichments + Spark Edge)
EDIT: I have been uploading the file with Pin-mapping.
This would be the right ones:
Can someone change the ignition pin mode to Falling and Rising in firmware?
(Instead of default, default inverted...)
Re: Tunerstudio Refactoring
Today we also got support for 1d arrays in TS.
This is very useful when tuning cold start, and work with several arrays at the same time.
This is very useful when tuning cold start, and work with several arrays at the same time.
Re: Tunerstudio Refactoring
A little more cleanup and changes.
Scaled the factoring to be % for corrections. (% Of normal fueling)
When connecting to board with this .ini, choose "use controller settings".
(Actually % of cranking base fuel pulse width for some of them, dont know how to change)
Started some rearranging/grouping in full pinout.
V 1.07
(these gauges added by Matt are really helpful to tune the ETB BTW)
Scaled the factoring to be % for corrections. (% Of normal fueling)
When connecting to board with this .ini, choose "use controller settings".
(Actually % of cranking base fuel pulse width for some of them, dont know how to change)
Started some rearranging/grouping in full pinout.
V 1.07
(these gauges added by Matt are really helpful to tune the ETB BTW)
Last edited by 960 on Fri Jul 19, 2019 5:11 pm, edited 1 time in total.
Re: Tunerstudio Refactoring
Yes it's really cool EBT calibration set up ...
Re: Tunerstudio Refactoring
I would also like to add presets for ETB's, so the part-numbers/type can be in a drop down.
If someone could make a initial preset would be great. (I dont know how)
I would also like to add presets for injectors and sensors, as I have pages of values for anything possible.
If someone could show me, I can do the job.
I dont suppose this layout will be used, but I am sure some parts could be useful.
If someone could make a initial preset would be great. (I dont know how)
I would also like to add presets for injectors and sensors, as I have pages of values for anything possible.
If someone could show me, I can do the job.
I dont suppose this layout will be used, but I am sure some parts could be useful.
Re: Tunerstudio Refactoring
And I made it for the sensors
Re: Tunerstudio Refactoring
Now with different dashes as pages
Re: Tunerstudio Refactoring
Only pic ??
How to used ?
How to used ?
Re: Tunerstudio Refactoring
If TS performs too slow, just right-click some of the dashes at the bottom and remove them.
You can also remove some gauges at some pages to make it improve.
If there are any bugs, or you want any changes/additions to menus, let me know.
You have to use TS Beta for this to work as it should.
You can also remove some gauges at some pages to make it improve.
If there are any bugs, or you want any changes/additions to menus, let me know.
You have to use TS Beta for this to work as it should.