[info] Proteus - Waterproof, High-feature ECU!

Hardware inside and outside of the ECU
Post Reply
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

mck1117 wrote:
Tue Oct 27, 2020 5:51 pm
The switch to F429 was because some actual analysis of the performance gain of the F7 over the F4 determined that it wasn't actually getting us very much gain, and the F4 was plenty.
on the other hand there is some (minor) caching magic in F7 and it's safer to be more consistent between ECUs
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
MgFoster
Posts: 36
Joined: Fri Dec 14, 2018 6:15 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by MgFoster »

Proteus working beautifully so far.

User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

https://github.com/rusefi/rusefi/wiki/Proteus#3d_cases now has links to two case options
Joey120373 wrote:
Tue Oct 27, 2020 4:55 pm
One other quick question, those 3D printed cases, and chance I could buy one or 2 from someone? I don’t own a 3d printer and don’t have access to one.
I have the same exact question :)
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

My "28 Andrey" 0.4 Proteus does not power on by USB. I measure ~1 Ohm between GND and 5v test pads.

Is that 3v regulator pictured here? Is that some kind of repair or JLC assembly?
Attachments
20201101_132919.jpg
20201101_132919.jpg (1.73 MiB) Viewed 35623 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

AndreyB wrote:
Sun Nov 01, 2020 6:40 pm
My "28 Andrey" 0.4 Proteus does not power on by USB. I measure ~1 Ohm between GND and 5v test pads.

Is that 3v regulator pictured here? Is that some kind of repair or JLC assembly?
That was my rework - the 3v regulator was suuuuper crooked on that board. I guess I managed a short in the process :(
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

And the winner is that little dot of solder between pins #9 and #10 of U1204.

It's totally the case "blowing hot air at the problem 1$, knowing where to blow 1M$"
Attachments
20201101_171049.jpg
20201101_171049.jpg (1.56 MiB) Viewed 35614 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
phoenix3d
Posts: 7
Joined: Mon Sep 21, 2020 4:27 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by phoenix3d »

Hi Guys...

I can do the 3D printed cases for you..

only issue is I am in South Africa... If you guys are willing to shell a bit for shipping out to your side?...

If interested I could inquire as to the costs to send via courier.. Just need to determine How many and which ones? and to where?...
So I can arrange best pricing..

Kindest Regs
Gordon.
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

AndreyB wrote:
Sat Oct 31, 2020 3:52 am
https://github.com/rusefi/rusefi/wiki/Proteus#3d_cases now has links to two case options
Joey120373 wrote:
Tue Oct 27, 2020 4:55 pm
One other quick question, those 3D printed cases, and chance I could buy one or 2 from someone? I don’t own a 3d printer and don’t have access to one.
I have the same exact question :)
I will have a Prusa Mini in approx 2-3 week, at which point I can (in theory) start churning out Proteus cases
deezums
Posts: 13
Joined: Fri Oct 09, 2020 6:09 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by deezums »

If the case is redesigned ever so slightly to fit inside a 180mm circle I may be able to print a few in some high temp plastics. I've got an all aluminum delta with a smart effector, full metal hotend, and a pretty high wattage heated bed. The large flat surfaces can be a little tricky, but I think I could do it in ABS or PC if I wrap it in cardboard...
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Dw111
Posts: 2
Joined: Fri Nov 27, 2020 5:36 am

Re: Proteus - Waterproof, High-feature ECU!

Post by Dw111 »

Good day gents. Want to find out if the Proteus can trigger these Denso coils on the Lexus V8?
Attachments
Small coil.jpeg
Small coil.jpeg (62.45 KiB) Viewed 35220 times
Gepro
Posts: 100
Joined: Sun Nov 01, 2020 2:15 pm
Location: France

Re: Proteus - Waterproof, High-feature ECU!

Post by Gepro »

For sure, it is a really common "smart" COP.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Merry Christmas Proteus, here's something from @stefans to cover you: DC-45F Heavy-Duty Electronics Enclosure with CNC custom cutout. Order was placed already, ETA middle-late January.
Attachments
Proteus_Case_Lid_DC-45.pdf
(108.75 KiB) Downloaded 391 times
Proteus_case_lid_DC-45.zip
(37.44 KiB) Downloaded 366 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

AndreyB wrote:
Fri Dec 25, 2020 2:30 am
Merry Christmas Proteus, here's something from @stefans to cover you: DC-45F Heavy-Duty Electronics Enclosure with CNC custom cutout. Order was placed already, ETA middle-late January.
Pic?
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

We have crimped Proteus pigtail kit now!

18 wires related to DBW are 200cm, the rest of the wires are 150cm. Available separately or as part of a kit on eBay. DM paypal is even better since that would save me 10% eBay fee :)

https://www.ebay.com/itm/333841923141

https://www.ebay.com/itm/333841924844
Attachments
s-l1600 (3).jpg
s-l1600 (3).jpg (247.93 KiB) Viewed 34390 times
s-l1600 (2).jpg
s-l1600 (2).jpg (222.83 KiB) Viewed 34390 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
cookiesowns
Posts: 2
Joined: Thu Dec 31, 2020 6:48 am

Re: Proteus - Waterproof, High-feature ECU!

Post by cookiesowns »

AndreyB wrote:
Sat Oct 31, 2020 3:52 am
https://github.com/rusefi/rusefi/wiki/Proteus#3d_cases now has links to two case options
Joey120373 wrote:
Tue Oct 27, 2020 4:55 pm
One other quick question, those 3D printed cases, and chance I could buy one or 2 from someone? I don’t own a 3d printer and don’t have access to one.
I have the same exact question :)
Yeah I can print some for you guys in PLA or PC.. PC will cost more as need to print with a raft.

Image

Image
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

PLA is probably ill advised - it gets floppy at low temp
User avatar
MHTSOS
Posts: 74
Joined: Sun Jun 02, 2019 6:46 pm
Github Username: MHTSOSVOODOO
Slack: Dimitri C

Re: Proteus - Waterproof, High-feature ECU!

Post by MHTSOS »

PC would be overkill for a case. PETG is the sweet spot. Can tolerate at least 75C, fairly easy to print, can withstand load, doesn't brake easily. PLA is no good even for in cabin installations. In the engine bay it would deform after first run.

Στάλθηκε από το CLT-L09 μου χρησιμοποιώντας Tapatalk

mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Proteus - Waterproof, High-feature ECU!

Post by mck1117 »

Public service announcement: V0.5 is published on GitHub: 🎉🎉🎉 https://github.com/mck1117/proteus/releases/tag/v0.5 🎉🎉🎉
image.png
image.png (2.27 MiB) Viewed 34058 times
TBD if/when a batch will get run, I know there's already some interest over in this thread: https://rusefi.com/forum/viewtopic.php?p=39441#p39441

Changes:
  • Added onboard barometric pressure sensor (yes, it's that tiny dot in the middle of the board near the MCU!)
  • Fixed knock audio output (3.5mm)
  • Various ease of assembly improvements
Last edited by mck1117 on Wed Jan 20, 2021 5:58 pm, edited 1 time in total.
Lambo97
Posts: 145
Joined: Tue Sep 29, 2020 9:51 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by Lambo97 »

I have 4 knock sensors I would like to use on my motor, I'm hoping to get that working on the V4 and V2 if possible.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Lambo97 wrote:
Wed Jan 20, 2021 4:39 pm
I have 4 knock sensors I would like to use on my motor, I'm hoping to get that working on the V4 and V2 if possible.
There is no hope for knock on Proteus 0.2 but Proteus 0.4 has knock gauge working just fine.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Lambo97
Posts: 145
Joined: Tue Sep 29, 2020 9:51 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by Lambo97 »

Would there be support for multiple knock sensors on V4 or at least 2 one for each bank?
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Lambo97 wrote:
Wed Jan 20, 2021 4:57 pm
Would there be support for multiple knock sensors on V4 or at least 2 one for each bank?
https://github.com/rusefi/rusefi/wiki/Hardware-Proteus-Wiring-v04 says two knock inputs.

So far I got one channel to show data on my v12, not sure why second channel not working could be hardware issue on my side.

You would need to add 4 wires into your harness let's discuss this NOT in this topic.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

Finally a Proteus case on eBay!
Flame-retardant ABS plastic
Machine screws thread into brass inserts for cover on/off convenience

https://www.ebay.com/itm/333867726828
Attachments
Resized_20210123_132917.jpeg
Resized_20210123_132917.jpeg (54.42 KiB) Viewed 33494 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
deaner
Posts: 56
Joined: Sat Jan 09, 2021 2:02 am

Re: Proteus - Waterproof, High-feature ECU!

Post by deaner »

AndreyB wrote:
Sun Jan 24, 2021 3:07 pm
Finally a Proteus case on eBay!
Flame-retardant ABS plastic
Machine screws thread into brass inserts for cover on/off convenience

https://www.ebay.com/itm/333867726828
Woot woot! Just put an order in for one.
Simon@FutureProof
contributor
contributor
Posts: 413
Joined: Tue Jul 24, 2018 8:55 pm
Github Username: Orchardperformance
Slack: Orchardperformance

Re: Proteus - Waterproof, High-feature ECU!

Post by Simon@FutureProof »

New V2 easy print case is now also good to go.
This fits the V4 and 5 versions of Proteus and is much simpler to print in PETG.
Attachments
20210228_015135.jpg
20210228_015135.jpg (496.88 KiB) Viewed 32748 times
20210228_015123.jpg
20210228_015123.jpg (394.79 KiB) Viewed 32748 times
20210228_015105.jpg
20210228_015105.jpg (517.48 KiB) Viewed 32748 times
V2 case.7z
(114.87 KiB) Downloaded 676 times
Now keeping MRE in stock in the UK - https://www.FutureProofPerformance.com
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Proteus - Waterproof, High-feature ECU!

Post by AndreyB »

A little birdie told me the Proteus 0.6 uses single TLE9202 instead of two TLE9201.

That's because as of today end of life https://octopart.com/tle9202edxuma1-infineon-81704134 is way more available than https://octopart.com/search?q=TLE9201
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Lambo97
Posts: 145
Joined: Tue Sep 29, 2020 9:51 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by Lambo97 »

mck1117 wrote:
Wed Jan 20, 2021 8:52 am

Changes:
  • Added onboard barometric pressure sensor (yes, it's that tiny dot in the middle of the board near the MCU!)
  • Fixed knock audio output (3.5mm)
  • Various ease of assembly improvements
I'm starting to wire up the 2 motors, debating if I want to sell the V2 and get the V5 for one of the motors. Can you expand on some of the updates.

1. Barometric sensor. Would this be more for fine tuning or something that is read by the computer dynamically during run to adjust for altitude?
2. Fixed Knock sensor audio output 3.5mm. Was this the Issue Andrey was having with one of the knock channels not working? What does this fix do for the user? I have a crap ton of knock sensors so would be nice to use at least 2.

Lastly since Andrey noted the proc being discontinued do you plan to release a V6 or are we waiting for a critical mass to get a bunch of the V5 boards our first?

Thanks again for any info!
Lambo97
Posts: 145
Joined: Tue Sep 29, 2020 9:51 pm

Re: Proteus - Waterproof, High-feature ECU!

Post by Lambo97 »

OrchardPerformance wrote:
Fri Mar 05, 2021 6:06 pm
New V2 easy print case is now also good to go.
This fits the V4 and 5 versions of Proteus and is much simpler to print in PETG.
Thanks for case, what about increasing the wall height to allow the rear USB to be cabled to the front on a plug? Just a thought.
Post Reply