[info] microRusEFI

Hardware inside and outside of the ECU
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: microRusEFI

Post by mck1117 »

MSD = USB mass storage (Mass Storage Device = MSD)

Looks like it's working though, so that's good!
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

JRD McLAREN wrote:
Sun Apr 04, 2021 7:48 pm
..what is "MSD" ... ?? Micro S D .. ? :?:
https://en.wikipedia.org/wiki/USB_mass_storage_device_class
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

OK ... mass storage ... (I know)

and another pic for future generations ...
Attachments
DSCN5400.JPG
DSCN5400.JPG (363.37 KiB) Viewed 34220 times
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

I have somewhere between 3 and 10 of these microRusEFI assembled as "brain board" with pins sticking out. One day I will have the full inventory and list those on eBay

this specific one is 0.5.0 others could be different revisions
Attachments
20210710_005540.jpg
20210710_005540.jpg (750.58 KiB) Viewed 33392 times
20210710_005532.jpg
20210710_005532.jpg (453.3 KiB) Viewed 33392 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

Is internal Flash memory used.. for anything ..??

Can I use S25FL127SAB flash ..??
cause Winbond W25Q128JVS are out of stock..

S25FL127SAB is almost the same, but 108Mhz only ...

How can I test it .?
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

micorusefi still does not use on board flash
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

PanasonicVL-621/DN is perfect RTC battery for MRE..
can be soldered directly to PCB

https://www.tme.eu/sk/details/vl-621_dn/akumulatory/panasonic/
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Funny thing how we still do not use that on-board flash chip :)

In the meantime removal of the flash is the way to wire bluetooth on the older microRusEFI editions like https://rusefi.com/forum/viewtopic.php?p=37479#p37479

on anything 0.5.0+ we have extra pins available and that hack is not needed.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

...but bluetooth works to version 20210306 ...

EDITED:
115200,8n1
Last edited by JRD McLAREN on Thu Nov 11, 2021 4:36 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

I'm try update to 20210719 .. and something is wrong ...
mre20210719_error.png
mre20210719_error.png (68.32 KiB) Viewed 32933 times
..is cam_debug "hardcoded" in current bundle ..??
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

No, it is not hard coded

Please post a link to your current tune on rusEFI online
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

..I'm found it ...

EXPERIMENTAL -> cam debug ....

When I'm was try to flash it for the first time, it frozen ..
and now I have some settings broken ...

But, bluetooth commmunication still not work ..
it is 38400,8,n,1 . ?
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

AndreyB wrote:
Mon Jul 19, 2021 3:00 pm
Funny thing how we still do not use that on-board flash chip :)

In.......
Can it will be used for log file storage .. ??
..rotating ...
:arrow:
.. some Proteus and microRusEFI for sale in Europe ..
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: microRusEFI

Post by mck1117 »

Not really worth the effort, no. Our other ECUs now all have SD cards instead, and that works really really well. Some day MRE will get an SD card too.
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

OK ... it's just a question ...

SD Card works well...
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

"22 - AN temp 4" is an option for vehicle speed sensor on VSS

JRD did it require any hardware mods at all? Anything to remove or add? What exactly are the changes to use "22 - AN temp 4" as VSS?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

It works well...

No modifications needed.
My VSS is Hall type 12V .. and works. (Grounding signal)
Signal wire is connected to 22- AN Temp4 directly without any pull-up/down resistor or divider.

EDIT:
...and 24 - AN Temp3 works too ...
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

VSS Tested and calibrated this friday ...
it works at 140kph with no issues ..
"no more space" to test it at 200
..or higher ...

6teeth and 0.54ratio (coef)
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

VLND5090TR can be replaced with BM2LC120FJ-C or BM2LC105FJ-C
..
but 3A current only ...
..it is still enough, I hope ..

and I'm not sure for IPD30N06S2L-23
Vishay SQD30N05-20L -- LOOKS BETTER ???
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Is anyone driving on microRusEFI in US?

It looks like tle8888-2qk non-watchdog version of the main chip is no longer available and I am looking for a definitive test of a unit with tle8888-qk.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Dron_Gus
contributor
contributor
Posts: 451
Joined: Wed Nov 13, 2013 1:11 pm
Location: S-Pb
Github Username: dron0gus

Re: microRusEFI

Post by Dron_Gus »

L9779-SPI is a candidate for TLE8888 replacement on MRE.
Some additional cool features (comparing to TLE8888):
3.3 V logic regulator
– 3.3 V precision voltage regulator (± 2%) with over-current protection
ISO9141 interface
–ISO9141 serial interface (K-Line)

Maybe something else.
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Dron_Gus wrote:
Mon Jan 03, 2022 10:34 pm
L9779-SPI is a candidate for TLE8888 replacement on MRE.
Not sure why it should happen but that would definitely be a different board name. As is TLE8888 and L9779-SPI seem like more or less the same thing just from different vendors. I think as long as we can purchase TLE8888 we would stay with it?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
Dron_Gus
contributor
contributor
Posts: 451
Joined: Wed Nov 13, 2013 1:11 pm
Location: S-Pb
Github Username: dron0gus

Re: microRusEFI

Post by Dron_Gus »

AndreyB wrote:
Mon Jan 03, 2022 10:42 pm
Not sure why it should happen but that would definitely be a different board name. As is TLE8888 and L9779-SPI seem like more or less the same thing just from different vendors. I think as long as we can purchase TLE8888 we would stay with it?
Yes. I see no reason to switch to 9779 until we (you) can get 8888.
But with 9779 we can make fully ST-based ECU. :) May be ask ST if they want to support us?
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

..and ask for tle9201 replacement also ..?
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
Dron_Gus
contributor
contributor
Posts: 451
Joined: Wed Nov 13, 2013 1:11 pm
Location: S-Pb
Github Username: dron0gus

Re: microRusEFI

Post by Dron_Gus »

JRD McLAREN wrote:
Mon Jan 03, 2022 10:56 pm
..and ask for tle9201 replacement also ..?
Yes. Something like L9960T :)
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

I'm found something "bad" .. in schema ...
(and on pcb also)

We have powered TLE9201 via 12V_MREL line..
..and ... we have NO POWER for E-Throttle WHEN we hit the starter ... :!: :?:
Last edited by JRD McLAREN on Mon Jan 10, 2022 10:22 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Please provide much more context. My microRusEFI has working ETB so your problem has to be specific to some vehicle? Very limited telepathy abilities still, without vehicle name and portions of schematics I have no idea what problem you are reporting.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

So ....

12VRelay is DOWN, when the starter is ON .. Right ....? (12V_MREL line)

If the answer is YES, the E-THROTTLE is OFF, and we have no power during start / cranking - for it

THEN
we can't flush cyls (if we need)
we can't add more air (via throttle pedal)
we can't driving idle ..etc ..?

I'm got focus on this when I'm can try to find 12V source for addon board....
Last edited by JRD McLAREN on Tue Jan 11, 2022 5:39 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
Dron_Gus
contributor
contributor
Posts: 451
Joined: Wed Nov 13, 2013 1:11 pm
Location: S-Pb
Github Username: dron0gus

Re: microRusEFI

Post by Dron_Gus »

TLE8888 will enable MainRelay output as soon as 12V_KEY (connector pin 5) is high.
Check that you are using correct IGN signal for this pin. One of IGNs can be disabled during cracking.
original.jpg
original.jpg (29.26 KiB) Viewed 29775 times
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

..is not problem, how fast is MainRelay ON ... after ACC / IGN signal

this condition is potential problem ... probably ..?? when TLE9201 is powered via 12V_MREL .. ??
12VRelay is DOWN, when the starter is ON .. Right ....? (12V_MREL line)
.. I'm assume:
12V_MREL ON - stopped engine
12V_MREL OFF - cranking
12V_MREL ON - run / idling

RIGHT .. ?

I have no problem on any (my) car at this moment ...
but maybe someone sometime ... :arrow:
.. some Proteus and microRusEFI for sale in Europe ..
Post Reply