[info] microRusEFI

Hardware inside and outside of the ECU
User avatar
Dron_Gus
contributor
contributor
Posts: 339
Joined: Wed Nov 13, 2013 1:11 pm
Location: S-Pb
Github Username: dron0gus

Re: microRusEFI

Post by Dron_Gus »

JRD McLAREN wrote:
Tue Jan 11, 2022 5:28 pm
.. I'm assume:
12V_MREL ON - stopped engine
12V_MREL OFF - cranking
12V_MREL ON - run / idling

RIGHT .. ?
Nope. 12V_MREL is on in all three states. To archive this you need 12V_KEY to be connected to IGN-1 on picture above.
JRD McLAREN
contributor
contributor
Posts: 378
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

YES, you right ...

my meaning is wrong ... sorry for effort ...

Some cars have two 15 lines (15 and 15A) form ignition switch ..
and some has "main relay" for whole electricity in the car - drive by ECU PCM or PMU
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 378
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

...picked from SLACK ...

Automotive companies avoid to use small (tiny) SMD components
smallest smd (0402) can be shorted by humidity sooner ... as bigger 1206 ...

I have same old ecus ..and the smallest one are 0603 ... 0805 is standard ...
"bigger" caps are 1206 ... etc ..

(many OEM ecus has no protective film / paint / glaze)

Will be good to use "automotive grade" passives for the future.
C0603C104K3RACAUTO - for explame

..and on the other side ...
avoid to use "BIG electrolytic CAPs" ... it can be broken by vibration ..
(it is glued if it is necessary)
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Pic of Ford or Hyundai not sure which one probably Hyundai

R22 is probably 1206?
I think I see at least caps smaller than 0603. Four sizes on the same board a bit insane.
Attachments
IMG_20220116_154236.jpg
IMG_20220116_154236.jpg (738.62 KiB) Viewed 4803 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
sepp2gl
Posts: 32
Joined: Sat Jan 01, 2022 3:47 pm
Location: Germany
Github Username: sepp2gl

Re: microRusEFI

Post by sepp2gl »

Hi guys,
just looking through MRE. Looks really nice for 4-cyl applications.
You decided to use TLE8888 for it.
Did you find a reliable distributor for the procurement of this chip?
I only found Digikey, who seem to be willing to sell small numbers of it.
Is there any other second source?
kr, sepp2gl
Everything keeps being better ... ;)
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

It was designed before the chip shortage :( yes magic part dependency was a risk then and is a bigger risk now
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 378
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

Mouser is distributor also ..

..and ... at this time, is problem to buy any kind of IC ...

(I waiting for stm32f407 .. 3 months)
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

http://www.itelma.ru/ M86 ECU used on https://en.wikipedia.org/wiki/Lada_Vesta

8450009519
8450009524
8450021514
8450032188
8450091352
8450091495
image.png
image.png (1.03 MiB) Viewed 4696 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Look 0.6.0 :)
MRE-0.6.0-JLC.jpg
MRE-0.6.0-JLC.jpg (852.67 KiB) Viewed 3231 times
GD-405-VG.jpg
GD-405-VG.jpg (292.83 KiB) Viewed 3231 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 378
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

WOW ... GD32F .... :shock:
.. some Proteus and microRusEFI for sale in Europe ..
puff
contributor
contributor
Posts: 2923
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: microRusEFI

Post by puff »

GD - :o
Is USB still a primary way of communications with TS / devconsole?
mck1117
running engine in first post
running engine in first post
Posts: 1338
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: microRusEFI

Post by mck1117 »

puff wrote:
Tue Apr 19, 2022 9:42 pm
GD - :o
Is USB still a primary way of communications with TS / devconsole?
Not a gd32 batch, just an experiment :)
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

puff wrote:
Tue Apr 19, 2022 9:42 pm
GD - :o
Is USB still a primary way of communications with TS / devconsole?
There must be a reason you are asking, do you want to share something? :)
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
puff
contributor
contributor
Posts: 2923
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: microRusEFI

Post by puff »

this is probably offtopic here ;-)
nothing particular. just saw a usb connector, which reminded me of some pronounced ideas of moving to can bootloader (still under construction?)

besides, when recently my brother was chip-tuning his diesel citroen, the garage guy soldered some wires to the ecu directly. he said he could flash it through a normal diagnostics connector, but in that case he won't be able to make a backup.

K-line or LIN might be too slow for this purpose, but the bandwith of CAN (a second one?) should be enough. However, with TunerStudio supporting only serial connection, there isn't much value in all this...
JRD McLAREN
contributor
contributor
Posts: 378
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: microRusEFI

Post by JRD McLAREN »

...is able to make backup via K-line .. when you have 45-80 min. time ...
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

puff wrote:
Wed Apr 20, 2022 5:26 pm
However, with TunerStudio supporting only serial connection, there isn't much value in all this...
Just a reminder that we have a working prototype of CAN-to-serial-to-TunerStudio bridge just need to figure out if there are defects there or not.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

JRD McLAREN wrote:
Wed Dec 22, 2021 5:06 pm
BM2LC120FJ-C or BM2LC105FJ-C
these parts have pretty similar specs why do they even have two different parts? is that a trade off between speed and resistance or something else?

105
image.png
image.png (17.23 KiB) Viewed 3126 times
120
image.png
image.png (13.34 KiB) Viewed 3126 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
MHTSOS
Posts: 59
Joined: Sun Jun 02, 2019 6:46 pm
Github Username: MHTSOSVOODOO
Slack: Dimitri C

Re: microRusEFI

Post by MHTSOS »

Different rdson resistance. Pick the lowest one since it makes less heat while on.

Στάλθηκε από το VOG-L29 μου χρησιμοποιώντας Tapatalk

puff
contributor
contributor
Posts: 2923
Joined: Mon Nov 11, 2013 11:28 am
Location: Moskau

Re: microRusEFI

Post by puff »

where do I read more about that CAN-to-serial-to-TunerStudio bridge? If it works fine, it might be a good idea to implement it on board, so that the ecu can be completely sealed?
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

microRusEFI 0.5 sale at https://www.shop.rusefi.com/shop/p/microrusefi-assembled-ecu-development-module fully assembled starting at $275
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

klpaul wrote:
Sun May 29, 2022 5:38 pm
AndreyB wrote:
Sun May 29, 2022 2:44 pm
Please update to latest https://rusefi.com/build_server/rusefi_bundle_mre_f4.zip and try again - I've changed something in that specific binary
Thank's, it's work.
Great to hear that we've made progress! For anything less general please post a separate build or separate questions threads
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

mck1117 wrote:
Tue Apr 19, 2022 9:45 pm
Not a gd32 batch, just an experiment :)
GD32F405 GD32F4 experiment failed: have a discovery board with GD32F405 - while openocd have successfully flashed rusEFI and st-link equally happy connects to this chip I do not even have LEDs blinking. Experiment goes on the shelf since zero priority.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

Now shipping microRusEFI 0.6.0 with on-board SD card.

For the last two months we were experimenting with $299 pricing at https://shop.rusefi.com/ but it gets back to $450 on Aug 15th.
Attachments
microRusEFI-0.6.0.jpg
microRusEFI-0.6.0.jpg (3.48 MiB) Viewed 267 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
007adr
Posts: 11
Joined: Wed Aug 03, 2022 2:04 am

Re: microRusEFI

Post by 007adr »

I ordered mine on the 4 th is it the 0.6 board?


Sent from my iPhone using Tapatalk
User avatar
AndreyB
Site Admin
Posts: 13029
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: microRusEFI

Post by AndreyB »

007adr wrote:
Wed Aug 10, 2022 10:25 am
I ordered mine on the 4 th is it the 0.6 board?
Yes, i think it is.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
007adr
Posts: 11
Joined: Wed Aug 03, 2022 2:04 am

Re: microRusEFI

Post by 007adr »

its ok if it isn't but awesome great edition to the project
Post Reply