Renault 8 Gordini [MicroRusEFI]

Your chance to introduce yourself and your vehicle
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Renault 8 Gordini [MicroRusEFI]

Post by JRD McLAREN »

So, new build / project started. It is not my car, but I must start it. .... :mrgreen:

Engine is Alpine 1.4 liter with turbo ...
all wires and sensors must be produced and mounted.
I have no idea, what kind of trigger wheel will be used ..
..full seq or pair ...
"how to wire" ETB .. different pedal + different throttle body ...
not have fuel pump, 3+1 old injectors, one has broken connector ...

.. so too much fun ... on it ...
Attachments
DSCN5773.JPG
DSCN5773.JPG (1.26 MiB) Viewed 22670 times
DSCN5774.JPG
DSCN5774.JPG (1.24 MiB) Viewed 22670 times
DSCN5775.JPG
DSCN5775.JPG (1.24 MiB) Viewed 22670 times
Last edited by JRD McLAREN on Sun Apr 17, 2022 8:31 am, edited 3 times in total.
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Renault 5 Gordini

Post by AndreyB »

According to https://rusefi.com/forum/memberlist.php?mode=viewprofile&u=923 you've only started two vehicles on rusEFI :( :P :P :P :P
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

No ..
it was 5 ..but it is not here ...
Last edited by JRD McLAREN on Sun Apr 17, 2022 8:31 am, edited 2 times in total.
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

...so .. car have flywheel form Renault 5 Turbo ..
and it looks like Renix 44-2-2 .. https://github.com/rusefi/rusefi/wiki/All-Supported-Triggers#renix-4422

Image
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

..mm.. some update ..

this car is mess, everything is wrong ...
wrong pipes, wrong gaskets, wrong gearbox mechanism ..
wrong clutch mechanism, all hoses and pipes touch together ..

I have some "new" connectors, prepared wiring loom ...
and fabricated bracket for CKP sensor ... (and it works)
Attachments
DSCN5787.JPG
DSCN5787.JPG (1.14 MiB) Viewed 22469 times
DSCN5796.JPG
DSCN5796.JPG (1.1 MiB) Viewed 22469 times
DSCN5797.JPG
DSCN5797.JPG (1.34 MiB) Viewed 22469 times
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

Can I ask ...
Renix trigger + CAM sensor ... will it run on full seq ..??

EDITED:
The answer is: YES
Attachments
DSCN5845.JPG
DSCN5845.JPG (1.33 MiB) Viewed 22354 times
DSCN5846.JPG
DSCN5846.JPG (1.31 MiB) Viewed 22354 times
DSCN5847.JPG
DSCN5847.JPG (1.29 MiB) Viewed 22354 times
Last edited by JRD McLAREN on Sat May 14, 2022 8:50 am, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

..and some photos ....

"CAM Sensor"
DSCN5852.JPG
DSCN5852.JPG (1.17 MiB) Viewed 22172 times
DSCN5853.JPG
DSCN5853.JPG (1.14 MiB) Viewed 22172 times
DSCN5854.JPG
DSCN5854.JPG (1.19 MiB) Viewed 22172 times
INTAKE ...
DSCN5858.JPG
DSCN5858.JPG (1.06 MiB) Viewed 22172 times
DSCN5861.JPG
DSCN5861.JPG (1.34 MiB) Viewed 22172 times
.. some Proteus and microRusEFI for sale in Europe ..
JPh
Posts: 163
Joined: Wed Jan 01, 2020 10:51 am

Re: Renault 8 Gordini

Post by JPh »

You may have some trouble with this trigger pattern and RUSEFI because of the abnormal long male tooth then the long gap. I work on a more modern Renault engine that has the same configuration in 60-2.
The Renix trigger decoder is probably untested on real engine. Expect to have to mill the long male teeth to go back to normal gap sequence.
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

So, we can test it ... :arrow:
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

.. some Proteus and microRusEFI for sale in Europe ..
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Renault 8 Gordini

Post by mck1117 »

why not upload an unlisted youtube video?

JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

I have no google account ..
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

SO ... tune and log are online ...

I have some problem with trigger ...
and it is not "mechanical" problem ...
(checked many times)
CAM is single tooth on HALL
CRANK is RENIX with original renault VR Sensor.
All signals looks good on scope.


VR polarity change has no affect ...
(..it has .. it can start or can't strat)
(no trigger readrings with bad polarity, the same as my other car)
Attachments
renault_trigger2022-05-23_11_55_43.png
renault_trigger2022-05-23_11_55_43.png (183.39 KiB) Viewed 21943 times
Last edited by JRD McLAREN on Mon May 23, 2022 8:33 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Renault 8 Gordini

Post by AndreyB »

JRD McLAREN wrote:
Mon May 23, 2022 5:00 pm
I have some problem with trigger ...
What problem is that? How do you test and how do you know that you have a problem?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

Ok ..
it's just a warning message... (LED is ON)

It's problem for the future or not ..?
.. some Proteus and microRusEFI for sale in Europe ..
JPh
Posts: 163
Joined: Wed Jan 01, 2020 10:51 am

Re: Renault 8 Gordini

Post by JPh »

The unstandart teeth pattern causes first tooth to be too long on signal. Conséquences are not clear for me yet.
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

Maybe, the same as 60/2 vs. VW60/2 ...
as we discussed before ..
it is the same "hardware" wheel .. but readings with HALL vs. VR is different
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

I have a problem with ETB and I need help ...

It is RENAULT ETB (see pic) and they "default" position is aprox. 5% opened
without power.
It can be fully closed "by hand" or by electric motor inside.

ETB Auto Calibrate can reach WOT and full closed state,
calibrate analog inputs values,
..but when MRE stop the power ETB's motor..
butterfly take it's "default" position -- 5% opened and I'm got an TPS ERROR message

(accel pedal not work at / after this moment)
Attachments
DSCN5880.JPG
DSCN5880.JPG (1.15 MiB) Viewed 21543 times
DSCN5879.JPG
DSCN5879.JPG (1.17 MiB) Viewed 21543 times
Last edited by JRD McLAREN on Wed Sep 28, 2022 1:54 pm, edited 1 time in total.
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

Stock Renault ECU drive Idle with this ETB from 5% opened to 0% reversed polarity on motor wires
..and accelerate from 5% to 100% - normal polarity on motor wires

PPS 0-100% = TPS 5-100%
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Renault 8 Gordini

Post by AndreyB »

please link your tune and a log of TPS movement from zero to 100 by hand
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

actual tune is here ...
https://rusefi.com/online/view.php?msq=1066

(I'm forgot write link)

Car is't at my workshop now, it's hard to test something at this moment.
We have short video on friend phone, I can upload it .. "somewhere" ..

I have one idea.
Can I calibrate TPS manualy from "default position" to WOT
and after that, have Idle control "from 0% TPS to -5%" ,, ??
.. some Proteus and microRusEFI for sale in Europe ..
mck1117
running engine in first post
running engine in first post
Posts: 1493
Joined: Mon Jan 30, 2017 2:05 am
Location: Seattle-ish

Re: Renault 8 Gordini

Post by mck1117 »

JRD McLAREN wrote:
Thu Jun 16, 2022 6:34 pm
I have one idea.
Can I calibrate TPS manualy from "default position" to WOT
and after that, have Idle control "from 0% TPS to -5%" ,, ??
Please do not do this. It's not safe.

The TPS error you see is a safety feature, intended to prevent the throttle from doing something unexpected, causing the car to crash (stuck throttle is very bad!).

Please make a normal log in TunerStudio (set communication data rate to maximum!) of TPS auto-calibrate, and moving the throttle open/closed with your finger.
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini

Post by JRD McLAREN »

will this help ..?
it is short log from "default position" to fully closed.

I can make full log by the next week ...

https://rusefi.com/online/view.php?log=893
Attachments
Screenshot_20220617_083529.png
Screenshot_20220617_083529.png (65.64 KiB) Viewed 21488 times
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini [MicroRusEFI]

Post by JRD McLAREN »

So .. we have another problem with this car .. a year after ...

We have Engine Cutoff, after TPS (or PPS) reach 30% or more ..
it is drivable below 30% TPS with no problem, engine can rev 4500rpm or more ...
.. 1st 2nd 3rd gear was tested only ... but it has no sense ...

Can anybody check log files please ..??

(cause I have no idea what's wrong) ...

Thanks.

https://rusefi.com/online/view.php?log=1245
https://rusefi.com/online/view.php?log=1246

EDITED:
Logs are from rev.2022044..
..but it's the same on actual build - 20230605
.. some Proteus and microRusEFI for sale in Europe ..
User avatar
AndreyB
Site Admin
Posts: 14292
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Github Username: rusefillc
Slack: Andrey B

Re: Renault 8 Gordini [MicroRusEFI]

Post by AndreyB »

Fresh firmware logs might have much more info and familiar data point names.
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions

Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini [MicroRusEFI]

Post by JRD McLAREN »

The car is 100km away from me .. at this moment ...

...but, we can try to use mechanical TB ... with cable ...
we still have "any problems" with this one .. (with this renault one)
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini [MicroRusEFI]

Post by JRD McLAREN »

So ...
we can't start engine on 20230605 ...

no spark and trigger error

tune: https://rusefi.com/online/view.php?msq=1491
Attachments
trgerr20230605.png
trgerr20230605.png (266.37 KiB) Viewed 18089 times
.. some Proteus and microRusEFI for sale in Europe ..
JRD McLAREN
contributor
contributor
Posts: 434
Joined: Mon Mar 04, 2019 10:19 pm
Location: Slovakia

Re: Renault 8 Gordini [MicroRusEFI]

Post by JRD McLAREN »

no ignition events
Attachments
2023-06-23_11_50_56_296rpm_0_maf_0.0.png
2023-06-23_11_50_56_296rpm_0_maf_0.0.png (20.38 KiB) Viewed 18088 times
.. some Proteus and microRusEFI for sale in Europe ..
Post Reply