Hello,
Am attaching the trigger pattern and the flywheel of an already EFI model single cylinder motorcycle.
Will it work with the firmware/board as is or or need some changes to the flywheel trigger.
Total 24 teeth with 1 teeth being the wide teeth. When the wide teeth passes the VR Sensor, engine is 5 degrees after-TDC as per service manual.
24-1 TRIGGER BUT NO MISSING TEETH
-
thefastelephant
- Posts: 3
- Joined: Thu Oct 09, 2025 3:51 am
24-1 TRIGGER BUT NO MISSING TEETH
You do not have the required permissions to view the files attached to this post.
-
AndreyB
- Site Admin
- Posts: 14772
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: 24-1 TRIGGER BUT NO MISSING TEETH
Next step is checking how signal actually looks with oscilloscope or tunerstudio logs or logic analyzer
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
thefastelephant
- Posts: 3
- Joined: Thu Oct 09, 2025 3:51 am
Re: 24-1 TRIGGER BUT NO MISSING TEETH
Will try to post a photo or log. Its my first ever attempt with a Standalone.