Manual:Debug fields
Jump to navigation
Jump to search
Debug fields is an advanced troubleshooting feature allowing one to monitor internal state of some rusEfi subsystems. In an ideal world we would be always saving all these data points, in reality we need to only save those while troubleshooting something specific.
| debug f1 | debug f2 | debug f3 | debug f4 | debug f5 | debug f6 | debug f7 | debug i1 | debug i2 | debug i3 | |
|---|---|---|---|---|---|---|---|---|---|---|
| Alternator_PID | duty cycle | integration term | previous error | I setting | D setting | dTerm | maxValue | P setting | offset | settings change counter |
| Idle | Valve position | integration term | previous error | I setting | D setting | dTerm | maxValue | P setting | offset | settings change counter |
| TPS acceleration | from TPS | to TPS | current TPS<>TPS value | extra fuel | ||||||
| Warmup PID | ||||||||||
| Engine load acceleration | ||||||||||
| Trigger Counters | channel #1 rise counter | channel #2 rise counter | channel #3 rise counter | channel #1 fall counter | channel #2 fall counter | channel #3 fall counter | ||||
| FSIO ADC | ||||||||||
| Aux PID #1 | ||||||||||
| VVT PID | ||||||||||
| Cranking | cycles from start counter | |||||||||
