Manual:Debug fields

From rusEfi
Revision as of 14:06, 17 December 2017 by Russian (talk | contribs)
Jump to navigation Jump to search

Debug fields is an advanced troubleshooting feature allowing one to monitor internal state of some rusEfi subsystems. In an ideal world we would be always saving all these data points, in reality we need to only save those while troubleshooting something specific.

set debug_mode X


debug f1 debug f2 debug f3 debug f4 debug f5 debug f6 debug f7 debug i1 debug i2 debug i3
Alternator_PID / 0 duty cycle integration term previous error I setting D setting dTerm maxValue P setting offset settings change counter
Idle previous result integration term previous error I setting D setting dTerm maxValue P setting offset settings change counter
TPS acceleration from TPS to TPS current TPS<>TPS value extra fuel
Warmup PID
Engine load acceleration / 4
Trigger Counters channel #1 rise counter channel #2 rise counter channel #3 rise counter channel #1 fall counter channel #2 fall counter channel #3 fall counter
FSIO ADC / 6
Aux PID #1
VVT PID
Cranking cycles from start counter
VSS vss event counter
FSIO_EXPRESSION / 23 FSIO output #1 FSIO output #2 FSIO output #3 FSIO output #4 FSIO output #5 FSIO output #6
Status / 24 Seconds since reboot VCS_VERSION


1-Base_Engine_Settings.png

Debug gauges.png