Difference between revisions of "Manual:Hardware where to get"

From rusEfi
Jump to navigation Jump to search
(Marked this version for translation)
 
Line 20: Line 20:
 
<!--T:6-->
 
<!--T:6-->
 
You would need to assemble most of this yourself. We have some [http://rusefi.com/forum/viewtopic.php?f=4&t=425 soldering hints for you].
 
You would need to assemble most of this yourself. We have some [http://rusefi.com/forum/viewtopic.php?f=4&t=425 soldering hints for you].
 +
 +
 +
 +
You can order some of the boards at our store @ [https://www.tindie.com/stores/russian/ Tindie]
  
 
</translate>
 
</translate>

Latest revision as of 11:14, 24 February 2014

Other languages:
English
Click here to learn about hardware development


As of today, we are still using STM32F4DISCOVERY evaluation board as the brain of our prototypes. Work is still in progress on our own main chip board. You would be programming and powering the brain board using a mini-USB cable (one comes with discovery) and you would be connecting to it using a micro-usb cable (that's your average Android phone cable)

In addition to the brain board you would also need rusEfi boards for signal input and output.

analog_board_progress.jpg

While we are doing our best to supply all the boards with a full Bill Of Material (BOM), sometimes it's cheaper to buy some generic stuff on eBay. More on that in our recommended shopping list.

You would need to assemble most of this yourself. We have some soldering hints for you.


You can order some of the boards at our store @ Tindie