[rusEfi] Моё Чудо ... VW Passat B4 ABA ... #16
Re: Моё Чудо ... VW Passat B4 ABA ... #16
[video][/video]
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Моё Чудо ... VW Passat B4 ABA ... #16
[video][/video]
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: Моё Чудо ... VW Passat B4 ABA ... #16
[video][/video]
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Log
- Attachments
-
- 2015-09-05_11.31.02.msl
- (356.12 KiB) Downloaded 718 times
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Thanks @russian he fixed probles ...
i run today maybe 20 minets and it`s almost perfect ...
spin engine to 6800 rpm its maximum to may camshaft ... CAMSHAFT (268°/260°-STREET) ...
on brord blinking just one LED (Ignition coil) ...
this data log but i thing its not shows correct ...
i run today maybe 20 minets and it`s almost perfect ...
spin engine to 6800 rpm its maximum to may camshaft ... CAMSHAFT (268°/260°-STREET) ...
on brord blinking just one LED (Ignition coil) ...
this data log but i thing its not shows correct ...
- Attachments
-
- 2016-06-13_17.54.08.msl
- (3.5 MiB) Downloaded 889 times
Last edited by Abricos on Mon Jun 13, 2016 11:21 pm, edited 1 time in total.
Re: Моё Чудо ... VW Passat B4 ABA ... #16
I dont have enough time to finishing this top cover ...
plus not enough experiences in 3D design ...
it is open project ...
https://www.tinkercad.com/things/a1djBGX29Xs-rusefi-top-case-box-cover/edit
plus not enough experiences in 3D design ...
it is open project ...
https://www.tinkercad.com/things/a1djBGX29Xs-rusefi-top-case-box-cover/edit
- Attachments
-
- rusefi_top_case_box_cover.zip
- (121.44 KiB) Downloaded 426 times
Re: Моё Чудо ... VW Passat B4 ABA ... #16
I make my video to ...
[video][/video]
[video][/video]
[video][/video]
[video][/video]
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Rims size 17
Tiers front 215 / 45 / 17
Tiers rear 245 /45 / 17
Lbs GVWR 3902 GAWR lbs front 2050 / rear 2072
vw passat b4 2.0L 8v gear ratios
CNL 3.778 2.118 1.429 1.029 0.837 3.684
Tiers front 215 / 45 / 17
Tiers rear 245 /45 / 17
Lbs GVWR 3902 GAWR lbs front 2050 / rear 2072
vw passat b4 2.0L 8v gear ratios
CNL 3.778 2.118 1.429 1.029 0.837 3.684
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Speed sensor work properly ...
[video][/video]
[video][/video]
Re: Моё Чудо ... VW Passat B4 ABA ... #16
I fix the car (supercharger) ...
recorded logs ...
Maybe someone will be interesting ...
Any help is appreciated ...
recorded logs ...
Maybe someone will be interesting ...
Any help is appreciated ...
- Attachments
-
[The extension msq has been deactivated and can no longer be displayed.]
-
- 2016-11-15_16.43.54.msl
- (1.69 MiB) Downloaded 670 times
-
- 2016-11-15_16.29.54.msl
- (3.22 MiB) Downloaded 692 times
Re: Моё Чудо ... VW Passat B4 ABA ... #16
today log
- Attachments
-
[The extension msq has been deactivated and can no longer be displayed.]
-
- 2016-11-20_16.02.47.msl
- (4.07 MiB) Downloaded 666 times
Re: Моё Чудо ... VW Passat B4 ABA ... #16
I'll see what I can do here:
- What firmware version are you running? I need that to use the proper ini file for TS
- You are generating a lot of errors. Looks like one exactly every ten seconds. No idea what's up with that.
- Your intake temperatures get insanely high. Over 200C.
- You are running off the MAF, but you have a MAP sensor. I suggest using speed-density algorithm
- Looks like your fuel-tune needs improvement/ is possibly non-existing
- Your ignition table looks super-conservative in the lower load cells
- What firmware version are you running? I need that to use the proper ini file for TS
- You are generating a lot of errors. Looks like one exactly every ten seconds. No idea what's up with that.
- Your intake temperatures get insanely high. Over 200C.
- You are running off the MAF, but you have a MAP sensor. I suggest using speed-density algorithm
- Looks like your fuel-tune needs improvement/ is possibly non-existing
- Your ignition table looks super-conservative in the lower load cells
Re: Моё Чудо ... VW Passat B4 ABA ... #16
rusEfi bundle snapshot_20161103_1854_rusefi
generating a lot of errors... i dont have no idea ...
intake temperatures ......... the next step of the installation intercoolers air\air water\air ...
in TS does not show 200C ??? and therefore may be error ???
I understand if MAP ON then MAF will turn off automaticaly ???
yes I use MAP speed-density ...
what should I need change fuel-tune improvement ???
what should I need change in ignition table ???
Thank you ...
generating a lot of errors... i dont have no idea ...
intake temperatures ......... the next step of the installation intercoolers air\air water\air ...
in TS does not show 200C ??? and therefore may be error ???
I understand if MAP ON then MAF will turn off automaticaly ???
yes I use MAP speed-density ...
what should I need change fuel-tune improvement ???
what should I need change in ignition table ???
Thank you ...
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Моё Чудо ... VW Passat B4 ABA ... #16
10 seconds is the default warning error period (this is to reduce the noise in the console messages but also affect logs, I guess I should improve the code so that console period does not affect logging frequency) https://sourceforge.net/p/rusefi/tickets/323/stefanst wrote:Looks like one exactly every ten seconds. No idea what's up with that.
CUSTOM_SYNC_ERROR_2 = 6037,
CUSTOM_LOGGING_BUFFER_OVERFLOW = 6044, - comm issue not important
CUSTOM_OBD_SKIPPED_SPARK = 6045 - that's ticket #299
CUSTOM_TOO_LONG_FUEL_INJECTION = 6050 - that's really interesting, that's injectors duty cycle?!
https://svn.code.sf.net/p/rusefi/code/trunk/firmware/controllers/algo/obd_error_codes.h
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Моё Чудо ... VW Passat B4 ABA ... #16
as long as fuel algorithm is Speed Density MAF sensor could be just logged but not used for fuel logic
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Моё Чудо ... VW Passat B4 ABA ... #16
VBatt (white line) drops from expected 14v to 2.5 volts from time to time which causes duty cycle to jump to 400%
I wonder if a wire is loose or a poor solder or else?
I wonder if a wire is loose or a poor solder or else?
- Attachments
-
- screenshot.png (51.57 KiB) Viewed 27955 times
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Re: Моё Чудо ... VW Passat B4 ABA ... #16
OK first I checked volts problem ...
2.5v it's mean ECU turn off ???
2.5v it's mean ECU turn off ???
Re: Моё Чудо ... VW Passat B4 ABA ... #16
2.5V probably means that it's powered from the USB port I assume is still plugged in.
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Yes I use 2 USB from discovery board ...stefanst wrote:2.5V probably means that it's powered from the USB port I assume is still plugged in.
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Then you have a problem with your +12V supply or possibly your GND connection.
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Power Supply ...
diode leg badly soldered ...
From left First leg badly soldered ...
[video][/video]
diode leg badly soldered ...
From left First leg badly soldered ...
[video][/video]
Last edited by Abricos on Thu Nov 24, 2016 12:00 am, edited 1 time in total.
Re: Моё Чудо ... VW Passat B4 ABA ... #16
The GND plane can suck up lots of heat, you may need to keep your iron on it for a long time to get the GND plane to heat up. If you have a 40W or 100W soldering iron you might want to try that. More heat can heat up a local area faster than the typical 20W irons.
Welcome to the friendlier side of internet crazy
Re: Моё Чудо ... VW Passat B4 ABA ... #16
It's all about turbo ...
[video][/video]
[video][/video]
Re: Моё Чудо ... VW Passat B4 ABA ... #16
Hello again ...
How to make on RusEFI same signal I needed ... As in my stock ecu ... to make a tachometer work ...
Recorded two tachometer signals ...
The first is the original ECU original tachometer ...
[video]https://youtu.be/mQ5vM8VILws[/video]
The second video is RusEfi ...
[video]https://youtu.be/2ZGCKQhjrqA[/video]
How to make on RusEFI same signal I needed ... As in my stock ecu ... to make a tachometer work ...
Recorded two tachometer signals ...
The first is the original ECU original tachometer ...
[video]https://youtu.be/mQ5vM8VILws[/video]
The second video is RusEfi ...
[video]https://youtu.be/2ZGCKQhjrqA[/video]
- Attachments
-
- pic.bmp (3.42 MiB) Viewed 26509 times
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: Моё Чудо ... VW Passat B4 ABA ... #16
rusEfi has two options for tachometer output:
1) dizzySparkOutputPin - This implementation makes a pulse every time one of the coils is charged. uses coil dwell for pulse width
2) tachOutputPin - This implementation produces one pulse per engine cycle. At the moment this implementation uses "pulse duration" setting for pulse width and this width is contant number of milliseconds, regardless of RPM
Looks like what you need is a way to make a 50% duty cycle signal which rusEfi currently does not support. Good news is that should be a simple chagne and I should be able to make this happen https://github.com/rusefi/rusefi/issues/476
1) dizzySparkOutputPin - This implementation makes a pulse every time one of the coils is charged. uses coil dwell for pulse width
2) tachOutputPin - This implementation produces one pulse per engine cycle. At the moment this implementation uses "pulse duration" setting for pulse width and this width is contant number of milliseconds, regardless of RPM
Looks like what you need is a way to make a 50% duty cycle signal which rusEfi currently does not support. Good news is that should be a simple chagne and I should be able to make this happen https://github.com/rusefi/rusefi/issues/476
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute