EMStudio and rusEfi
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EMStudio and rusEfi
Cool stuff
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EMStudio and rusEfi
Two of these links are less than alive. Update Top post?malcom2073 wrote: ↑Mon Dec 26, 2016 2:54 amHey!
A bit of overview:
EMStudio
https://github.com/malcom2073/emstudio
https://github.com/malcom2073/emstune
https://github.com/malcom2073/emslogview
Also shall I drop my top post in this topic for you to become topic starter?
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
-
- Posts: 22
- Joined: Thu Aug 13, 2015 4:50 pm
Re: EMStudio and rusEfi
Perhaps lock this thread, and I could start a new thread for "EMStudio development" and write a new overview post that is more accurate to reflect the current development path. A lot of the info in this thread is outdated since that was back when EMS was more aimed towards the libreems related development.
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EMStudio and rusEfi
Locked - let's continue at https://rusefi.com/forum/viewtopic.php?f=5&t=2369
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
- AndreyB
- Site Admin
- Posts: 14374
- Joined: Wed Aug 28, 2013 1:28 am
- Location: Jersey City
- Github Username: rusefillc
- Slack: Andrey B
Re: EMStudio and rusEfi
CCP came up again today so https://jnachbaur.de/ASAP2Demo/ASAP2Demo.htmlbri3d wrote: ↑Mon Jun 20, 2022 6:39 pm* Implement CCP or XCP. These are the industry standards for calibration over CAN, and they define the exact kinds of primitives you would want for tuning. The problem is, it's a very proprietary and tight knit industry, so to calibrate on top of these requires a lot of proprietary tools that are illegal and hard to get. ASAP2Demo is the only free CCP/XCP calibration tool which I know of and while it's surprisingly good, it's not much better than TunerPro UI wise. Much like $22 and $23 UDS, this seems appealing on the surface because it's implementing an "industry standard," but at the end of the day it's an industry with thousands-of-dollars or fully proprietary tooling anyway, so there's really no point in compliance.
https://rusefi.com/forum/viewtopic.php?f=5&t=2419
Very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute
Always looking for C/C++/Java/PHP developers! Please help us see https://rusefi.com/s/howtocontribute