[info] MX7-C-35PL-C11 35 pin connector

Hardware inside and outside of the ECU
Post Reply
User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

Board ordered as 2oz (takes more time)
Seems like Oshpart has improved their processing software to merge two drill files - previously they were only using one file and it did not go well for us.
Attachments
491b23df27cd1c04564ee206a167b3b4.png
491b23df27cd1c04564ee206a167b3b4.png (138.77 KiB) Viewed 2047 times
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

board looks good
Attachments
20161221_213641.jpg
20161221_213641.jpg (755.31 KiB) Viewed 1979 times
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3625
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by kb1gtt »

That's good news. Looks good.
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

Finally getting back to making the harness but this board has the same silkscreen offset issue as http://rusefi.com/forum/viewtopic.php?f=4&t=687

While we are on that can we also make traces wider as well? Could be same issue with copper rings too large.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3625
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by kb1gtt »

Which revision is your board marked? We have a couple out there now are we sure you have the correct revision? Just trying to make sure we are all on the same page, as I don't have eyes on it.
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

That's a young board, only 0.1 was ever ordered - that's the revision i have.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3625
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by kb1gtt »

Oh, that's a different board. I changed the mask to 0.003, and fattened up the traces where I could. Draft committed.
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

I need your gerbers and your suby (once I get I larger garage)
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3625
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by kb1gtt »

Gerbers generated and committed.
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

kb1gtt wrote:Gerbers generated and committed.
I know what i have forgotten to ask for :(

Can you please add pinout silkcreen on the back side as well? That's only needed for wiring half of the connector - the connector pads are covered by plastic.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

User avatar
kb1gtt
contributor
contributor
Posts: 3625
Joined: Tue Sep 10, 2013 1:42 am
Location: ME of USA
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by kb1gtt »

Silk screen added, and re-committed.
Welcome to the friendlier side of internet crazy :)

User avatar
AndreyB
Site Admin
Posts: 10382
Joined: Wed Aug 28, 2013 1:28 am
Location: Jersey City
Soldering skill: yes
Coding skill?: yes
Contact:

Re: MX7-C-35PL-C11 35 pin connector

Post by AndreyB »

kb1gtt wrote:Silk screen added, and re-committed.
Thank you! Just ordered new boards.
https://rusefi.com/s/howtocontribute
very limited telepathic abilities - please post logs & tunes where appropriate - http://rusefi.com/s/questions
my skype is arro239

Post Reply