board_configuration.cpp

Go to the documentation of this file.

/**
 * @file board_configuration.cpp
 *
 *
 * @brief Configuration defaults for the hellen-na8-96 board
 *
 * See http://rusefi.com/s/hellenNB1
 *
 * @author andreika <prometheus.pcb@gmail.com>
 * @author Andrey Belomutskiy, (c) 2012-2020
 */
 
#include "pch.h"
#include "hellen_meta.h"
#include "board_overrides.h"
 
static void setInjectorPins() {
    engineConfiguration->injectionPins[0] = Gpio::H144_LS_1;
    engineConfiguration->injectionPins[1] = Gpio::H144_LS_2;
    engineConfiguration->injectionPins[2] = Gpio::H144_LS_3;
    engineConfiguration->injectionPins[3] = Gpio::H144_LS_4;
 
    engineConfiguration->clutchDownPin = Gpio::C4; // Clutch switch input
    engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
    engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
    engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO8;
}
 
static void setIgnitionPins() {
    engineConfiguration->ignitionPins[0] = Gpio::H144_IGN_1;
    engineConfiguration->ignitionPins[1] = Gpio::Unassigned;
    engineConfiguration->ignitionPins[2] = Gpio::H144_IGN_2;
    engineConfiguration->ignitionPins[3] = Gpio::Unassigned;
}
 
static void setupDefaultSensorInputs() {
    // trigger inputs, hall
    engineConfiguration->triggerInputPins[0] = Gpio::H144_IN_CAM;
    engineConfiguration->triggerInputPins[1] = Gpio::H144_IN_CRANK;
    engineConfiguration->camInputs[0] = Gpio::Unassigned;
 
    engineConfiguration->tps1_1AdcChannel = H144_IN_TPS;
 
    engineConfiguration->mafAdcChannel = EFI_ADC_10;
    engineConfiguration->map.sensor.hwChannel = H144_IN_MAP3;
 
    engineConfiguration->afr.hwChannel = EFI_ADC_1;
 
    engineConfiguration->clt.adcChannel = H144_IN_CLT;
 
    engineConfiguration->iat.adcChannel = H144_IN_IAT;
}
 
 
 
static void hellen_MiataNA96_boardConfigOverrides() {
    setHellenVbatt();
 
    setHellenSdCardSpi2();
 
    setDefaultHellenAtPullUps();
 
    setHellenCan();
 
    engineConfiguration->etb_use_two_wires = true;
    engineConfiguration->etbIo[0].directionPin1 = Gpio::C7; // PWM 3
    engineConfiguration->etbIo[0].directionPin2 = Gpio::C8; // PWM 4
    engineConfiguration->etbIo[0].controlPin = Gpio::C6;        // PWM 2
}
 
/**
 * @brief   Board-specific configuration defaults.
 *
 * See also setDefaultEngineConfiguration
 *
 
 */
static void hellen_MiataNA96_boardDefaultConfiguration() {
    setInjectorPins();
    setIgnitionPins();
 
    engineConfiguration->enableSoftwareKnock = true;
 
    engineConfiguration->boostControlPin = Gpio::H144_LS_6;
    engineConfiguration->acSwitch = Gpio::H144_ORIGINAL_MCU_IN_D_AUX3;
    engineConfiguration->acRelayPin = Gpio::H144_OUT_IO6;
    engineConfiguration->fuelPumpPin = Gpio::G2;    // OUT_IO9
    engineConfiguration->idle.solenoidPin = Gpio::D14;  // OUT_PWM5
    engineConfiguration->fanPin = Gpio::D12;    // OUT_PWM8
    engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM1;
    engineConfiguration->fan2Pin = Gpio::H144_OUT_IO2;
 
    // "required" hardware is done - set some reasonable defaults
    setupDefaultSensorInputs();
 
    engineConfiguration->cylindersCount = 4;
    engineConfiguration->firingOrder = FO_1_3_4_2;
 
    engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
 
 
 
    engineConfiguration->clutchDownPin = Gpio::H144_IN_D_2;
    engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
    engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
// ?    engineConfiguration->malfunctionIndicatorPin = Gpio::G4; //1E - Check Engine Light
}
 
void setup_custom_board_overrides() {
    custom_board_DefaultConfiguration = hellen_MiataNA96_boardDefaultConfiguration;
    custom_board_ConfigOverrides =  hellen_MiataNA96_boardConfigOverrides;
}